Head bolts

[Pogo]

Well if it is 16lbs I can't use my ft lbs torque wrench that low so I will proabley use my inch lbs. Or like the good old days, half a turn before breaking. Thanks again. Have to get some picture of my ride so you can see the bling bling I added.

[olderthan]

i have never used my inch pounds for head bolts i actualy torque to 15# because my ft lbs will not register at 16# but next time i will try my snapon torquemeter for it.thanks for
the idea

[SYCARMS]

12X16=192 translates to 192"lbs.