jimgaines

[jimgaines]

I am working on a Helix 150cc, and there's no fire to the plug, any ideas, I have bypassed the 2 circuit breakers?

[olderthan]

welcome to the group

[SYCARMS]

Check the engine kill switch than the ign switch, if good check all wires to plugins for the coil, cdi, and statoe for a loose wire. If all check out go to the American Sportworks web site and download the manual which will give step by step on checking the ignition system.
Tom

[jimgaines]

Check the engine kill switch than the ign switch, if good check all wires to plugins for the coil, cdi, and statoe for a loose wire. If all check out go to the American Sportworks web site and download the manual which will give step by step on checking the ignition system.
Tom
Done all the above, bypassed both kill switches, waiting on stator & flywheel, had to cut the flywheel off, would not come off with wheel puller.

[jimgaines]

anybody know the size of key way, in flywheel?

[SYCARMS]

I keep them in stock, cost $4.50. Pulling the flywheel requires a special puller for the GY6 engine.
Tom