Voltage regulator
 

I need a voltage regulator for my ASW Carbide. I found it on buggy depot and it's backordered. I found it somewhere else but I just want to make sure it's the right one.

http://swaptchicago.com/en/gy6/31-11...rectifier.html

Please let me know if this will work

The link you sent shows a rectifier for an 11 pole stator, yours will be a 6 or 8 pole, the connection will be slightly differant. Carbide rectifier cost is about 20.00 + S/H.

TOM

What throws me is that I have two carbides and they Have different rectifiers :/ how do I know which one will work?

What is differant with the rectifiers?

TOM

The other rectifier (first picture) has a single four pin plug on it. The one I need (last three pictures) has two wires that come out of it. One has a four pin plug on it and the other wire runs to the front of the vehicle.

The BD regulator uses a 4-pin output and 3-pin input connector. It will work if you connect your 2-phase stator to 3-phase rectifier, but the connectors do not match.

The BD regulator? What?

BD = Buggy Depot

Yes but they ate backordered. I need it installed on my buggy by Oct. 8.

If Tom cannot help, I have a spare I can sell you.

I don't mind buying from either one of you; I just want to KNOW I'm getting the right one!

GX150? Tom? Can SOMEONE lead me to a page that has the right one in stock?

I'm not a dealer. I have a good used one in my spare parts box.

How do I know it's the right one?

Give me a call tomorrow 662-301-1563 or e-mail me your number with a time to call and I'll call you. tom@sycpowersports.com

TOM

Ok...