KFX 90 light mod
 

I added a set of LED lights to my sons KFX 90. Removing the nose valance and using a hole saw to cut the holes for the leds to fit tight in the plastic. The metal bracket that holds the valance also needed to be modified slightly with a grinder. All and all they look fantastic almost stock. At the time I did this I was not 100% sure how powering them was going to work out so I just wired them to the battery. Unfortunately after about 2 hours the little battery is dead as the lights draw more than it can store while also sucking up the stator power meant to charge the battery. I am not really wanting to put a junky eBay GY6 lighting stator in this. Anyone have any ideas? Or know where I can find a quality lighting stator?

http://www.buggymasters.com/forum/pi...pictureid=2507
http://www.buggymasters.com/forum/pi...pictureid=2506
http://www.buggymasters.com/forum/pi...pictureid=2504

Try ricky stator. If the don't have one, they can probably make one.

I looked up Ricky stator. Seems like a quality product but a bit pricey. I am debating wrapping my own although I heard it is not the easiest thang to do.