BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum (http://www.buggymasters.com/forum/index.php)
-   150cc GY6 and Under Engine Tech (http://www.buggymasters.com/forum/forumdisplay.php?f=29)
-   -   fox carbide was running great now wont take the gas (http://www.buggymasters.com/forum/showthread.php?t=5207)

hsracer21 11-24-2014 07:46 PM

fox carbide was running great now wont take the gas
 
was running great then acted like it was running out of gas.but still had a half a tank.runs about 1/3 throttle but anymore it shuts down. thanks in advance

zman007007 11-25-2014 12:33 PM

just FYI, if it takes you a month to answer back like it did last time you posted a problem, not many people will be in a hurry to help you. just saying, not trying to be rude.

hsracer21 11-25-2014 06:10 PM

don't get on here much. Been too busy and I am kind of computer illiterate .but I am learning

Sickartistic 11-25-2014 09:10 PM

If it is a vac activated fuel valve you may want to check the filter in the tank, the vacuum lines are hooked up properly (2 lines vac on the bottom) and there is no leaks in the vac lines or the manifold. After you check these issues let us know what you find.

zman007007 11-26-2014 01:07 PM

hey don"t worry about not knowing much about computers, we are here for the buggies not to judge ones skill on the computer. As long as we can understand what you want to know is all that matters.

hsracer21 11-27-2014 06:47 PM

has gravity fed fuel, check all clamps and screws on carb and also manifold bolts. everything was tight.fired it up and stilled missed.then all of sudden it went to running right. must have been trash in carb

Sickartistic 11-28-2014 10:30 PM

Glad you got it right. Like z said there's always someone here just keep us updated.

1975 camaro guy 01-01-2015 03:42 PM

asw 150 will not take gas
 
hello to everyone out there.just wanted to ask if anyone had any idea about this buggy i picked up.when i got it. it wouldnt run.got a new carb,coil,gas filters and hoses.it runs now but will not take gas.acts like its out of time.someone said, if it was out of time it wouldent start at all.i have no idea.does anyone have any idea what i should do next.THANKS TO ALL.....


All times are GMT -5. The time now is 01:54 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.