HOW TO- remove emissions
 

I figured i would do a quick how to. I removed the emissions junk and drilled the exhaust out and took pics along the way. Figured i could show i did these mods.

First, removing emissions.

I dont own a welder yet so i figured why not try it being more creative.

First i found a self tapping bolt that was just slightly bigger than the ID of the tube. I just happened to have one.

Then i removed the emissions thingy and cut the tube the same length as the bolt i had.

Lifting your buggy first helps getting the exhuast off hehehehe

http://i34.photobucket.com/albums/d1...rs/Barn020.jpg
http://i34.photobucket.com/albums/d1...rs/Barn021.jpg


http://i34.photobucket.com/albums/d1...rs/Barn004.jpg

http://i34.photobucket.com/albums/d1.../Barn005-1.jpg

http://i34.photobucket.com/albums/d1.../Barn007-1.jpg

http://i34.photobucket.com/albums/d1...rs/Barn008.jpg

Then i screwed the bolt in and then backed it out. It effectively made threads inside the tube. I then slathered the bolt in locktite and put it back in.

http://i34.photobucket.com/albums/d1.../Barn009-1.jpg

And thats it, works great.