BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum (http://www.buggymasters.com/forum/index.php)

- Off Topic (http://www.buggymasters.com/forum/forumdisplay.php?f=47)

- - I'm poor and old school (http://www.buggymasters.com/forum/showthread.php?t=6264)

tim	10-19-2017 08:06 PM

I'm broke and old school

Was searching the web pretending i had the ability to build buggy from scratch and came across this on YT. Now I know for sure I'm poor and very old school.
:hail: :drive:

https://m.youtube.com/watch?v=be4LrGn0lPg&sns=em#

neo71665

10-19-2017 10:56 PM

https://www.youtube.com/watch?v=zKkAHn8qGWo

I was taught how to do this on paper and cut it out with a cutting torch. Depending how good you are with the torch it comes out pretty workable. No where near what they can do with a plasma/water/laser table. A grinder and paint makes me the welder I aint.

tim	10-20-2017 12:48 AM

Cool!_ I've always had to cut with angle cut saw and weld all four sides hoping it would stay true.I was looking for affordable tubing bender and came across this video thought folks might like it

neo71665

10-20-2017 02:25 PM

Quote:

Originally Posted by tim (Post 53703)

Cool!_ I've always had to cut with angle cut saw and weld all four sides hoping it would stay true.I was looking for affordable tubing bender and came across this video thought folks might like it

99% of the time I load it up in the band saw or chop saw and just cut it and weld it all up.

liduno

10-20-2017 03:42 PM

You can get it amazingly tight with just a band saw.

https://www.youtube.com/watch?v=3XvN2FRbi2U

All times are GMT -5. The time now is 08:10 AM.