Gixxer sprocket adapter, shaft and support bearing
 

I bought a GSXR output sprocket adapter, had a shaft made and a bearing support to swap a GXSR 600 motor into a buggy.

Plans changed and need to sell, I have close to 300.00 into the whole set up, and I am sking 250 plus shipping.

Shaft is custom made with a 1/4" key way, and is @ 10" long, it was turned down from high strength steel. shaft is a tight fit ont he bearing, and will need to be either buffed down, or the gear sweat onto the shaft, the OD is 1.249 +/- .005

Asking 250.00 for the complete assembly adapter, shaft and bearing.

Mike, 281-917-8796 text would be the easiest,