Uni Air Filter
 

I just got my box of parts from a supporting vendor. In that box was my Uni filter and velocity stack. I noticed there is small tube that ran from the old air filter box to the engine head. There is no port in the velocity stack with which to put that into. what do I do with that?

nothin. its like oil return or somethin

just put a little screan on the tip and it'll work great!

really?..... OK

its what every one else does lol

Evan's right - it's a breather tube, and from time to time some drops of oil may drip from it. If you ever find that a LOT of oil is coming out (frequent drips or God forbid a stream!), then something is wrong.

You can put one of the UNI breather hose filters we sell on it, or you can tie wrap it out of the way to the frame somewhere. Just don't block it off.

Thanks for the info Mike.

That tube is realy a PCV tube. There are some that will drill and tap a fitting on there however you can just let it lie. Be sure to post up what you thing about the mods.

wow im like right for the first time~lol

mines metal, but it would still be easy to do that to, and i will post about the mods. I might be going to turkey bay tomorrow... hopefully

kewlio

yeap

I did what ****Mike suggested. A UNI Breather Hose Filter.