Intake spacer
Just curious to know if anyone is using their stock black intake spacer with the 30mm intake manifold. I am not using mine as the bolts that came with it don't seem like it would be possible, unless you switch to a longer bolt. I have noticed that my carb sits on the rear crossbar causing the coupler on the intake manifold to not be straight and cylindrical. Basically pushing the carb up. If I were to put the black spacer in between the head and 30mm intake manifold this would fix that issue.
|
I'm not using one. The I.D. of the spacer on mine was 24 or 26mm and I kept breaking them trying to bore them out to 30mm with a step bit.
|
I had the same issue with my carb position. It made it impossible to secure the stock breather box tube to the carb itself. I actually had to end up using a set of soft grip handle bar slip ons to make the junction work! took a little contortion but worked!
|
All times are GMT -5. The time now is 11:25 PM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.