Slip out of Drive Under Load
 

I recently replace the cluster and final gears. Since install everything worked fine for about 6 hrs of drive time. Now the cart slips out of drive, when I can get it in gear, when I try to accelerate past a crawl. Reverse is fine. I can go full throttle in reverse without it slipping.

I am hoping that I am not messing up the forward gear on the cluster drive. I feel that the issue might be with

1. A loose shift cable that will not engage fully into forward
2. An issue with the CVT causing it to slip out of gear at a higher RPM

I would really hate to have to pull the transmission back apart. I would really hate to pull the transmission apart and see the cluster drive clustered.

Please help.

Try adjusting the cable first. Hope you don't have to open it again.

Fixed the problem. The part that connects to the engine (not sure the name of it) with the shift cables is what I adjusted. I pulled it and rotated a few clicks at a a time until I got the results I was looking for. All is gear issues are fixed!