trailmaster xrx suspension
so i was debating on whether or not the hammerhead nitrogen front suspension upgrade would work as a purely bolt on system for the trailmaster xrx.
i emailed and im no where near my buggy as im in miami and my buggy is in des moines, but they responded with a question about the length of the tie rods. are they 6 1/4"? |
:evil:
they will not, to make them work the tie rods, upper and lower A arms all need to be longer. basically you would need to buy HH gts platinum parts to make it work. so 2 shocks , 2 lower arms, 2 upper arms and 2 tierod sleeves which you might have to buy the whole tie rod assembly. for that money you might call WORKS shocks and have a set built. me personally would be more inclined to modify the front and try some atv shocks |
well, there's a front end kit, so what you're saying is the tie rods are not 6 1/4".
that's an easy fix i'd say. $42 for two isn't that bad. |
:evil:
ok didnt know they followed through w/ the kit, i was the dummy who gave them the idea, but i guess they didnt listen enough to include the tierods in the kit. |
so that being said, everything will bolt on? i won't need to change the strut and spindle supports as well?
|
:evil:
no w/ all of those parts it should bolt on. |
All times are GMT -5. The time now is 06:52 AM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.