gas pouring
I just installed a new carb on my 150cc hammerhead and it ran fine for 5 to 10 minutes then it died. and saw gas running out of the upper vent hose that is between the electric choke and the big diaphram cap.its on the left side/driver side..so what will cause this problem.see my other posts by goldwinger this might help with the problem
|
I haven't gone thru the trouble of looking for ur other posts. But it may be ur float or vacuum lines if you have vacuum lines that is.(air in lines).
|
All times are GMT -5. The time now is 09:00 PM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.