ok on the starter solenoid it has juice which i can start the engine if i
put a screw driver accross it...
i have checked the red button and the green button wiring and also the wire with the wire nut on it and none seem to have power as far as 12 volts...
when i get a chance i will try to retest the wires again just to make sure...
if i knew how this thing was wired as far as colored wires i am sure i could do
it but i have no idea how they changed the wiring if they did do that..
as i had said in my first post.. the switch that is under the seat that goes to brake is bypassed, so there is no need to press the break to get it started....
this wiring is not that difficult , but when yah get frustrated it can be.....
|