yeah, I was looking at that too x-bird, I went out and did mine and I had to put a little weight in the buggy to keep both wheels down.
T.J.
Hey MSM, do you by any chance know the OD of the stock A-arm tubing for the yerf? I plan on extending my top ones this week and moving my shock mounts to the top side. I'm gonna just do it the same way I did the tie rod, cut slip some tubing over them and weld. I want to get all this done so I can get some better shocks ordered.
I would go and do it myself but I don't have a caliper yet, and I figured you might know what it is off the top of your head.
Thanks.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
Last edited by T3beatz; 04-01-2012 at 08:09 PM.
|