yep they do... the ignitions with the spade type plugs on them are much better, you can swap them around and see what goes where. You can try and tape them on temporarily to see if you can get it to fire up, if not then your gonna have to do a lot of soldering. (that's why I say before you solder make sure you can get the buggy to start up).
Or you can go out and get a lawnmower ignition that will fit the hole (most of them come with the spade connectors.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
|