That wont work unless you have an aftermarket axle installed where you can move the sprocket from side to side on.
You will need something like this ... http://www.ebay.com/itm/GT-Reverse-a...ht_2890wt_1397
or this... http://www.ebay.com/itm/GY6-150cc-Re...373954&vxp=mtr
these where only 89 with free shipping, but for some reason the price has jumped over 100bucks! You can find them for around 150 at other places
http://www.chineseatvonline.com/gear...s-p-12842.html
As far as the turn goes... You have to make sure the rack is centered, then set the wheels strait, check after that to see if your turning is equal. If it's not equal after that then your spindle might be bent, or something else is off.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
Last edited by T3beatz; 06-29-2012 at 09:54 PM.
|