Your Roketa is an early model 2006-2008 made by Sunl which is out of business but there is sunlpartsonline who purchased the leftover parts from MaxiMoto who bought out Sunl. Once a part dries up no more are to be had. The biggest headach is if your buggy had the GY6 series B engine. This can usually be identified by the 2 bolt valvecover as the series A most common engine used was a 4 bolt cover. But Sunl started toward the eng using the 4 bolt valve cover on their series B engine. The only way to tell the series from a 4 boly cover is to measure the cylinder studs diagnally. If center to center is 3" you have the common A series, if 3 1/8" its the B series which can be a headach getting the hard engine parts.
The mini raider I will assume has the Honda CT series cloned engine. Post some pics of entire engine and the cover as well as the stator, I can determine from the pics which year model clone was used. Back to the 150, if you go to American Sport Works site you can download their service manual which gives step by step for checking the charging/ignition system complete with all values. All you will need is a good digital volt ohm meter and a puller if needed to pull the flywheel.
|