The stators look the same, not sure if it is the pic but the old one looks to have slightly larger coils but should be no problem just a lesser capacity.You mentioned the new has 6 wires, I can only see 5 wires on both stators, old p,y,g,b,&bl new r,g/w, y,w,bl/w. The bl/w should be the trigger the other wires just trace where they go on old stator and new then match the different colors. The relay looks correct it just has the rubber mounting isolator. I personally have never run across this type of relay, usually a solenoid switch is used. Relays are normally used for acessories such as lights and horn.
|