I started wiring this thing. Searched high and low for a while trying to find a water tight box with the right diminsions to hold the electrics. Turns out I found an old first aid kit I've been kicking around for years. The box is perfect! It's mounted on the frame behind my left shoulder so there's easy access. Getting that rats nest of wiring off the swing arm cleans things up. The CDI, starter relay, resister along with a ATO 6-gang fuse panel and a 8 gang ground block are inside.The rectifier is mounted external on the back for cooling. All the circuts are independent from one another, ignition charging, lighting etc, so a failure with one won't effect the others This should make any sort of future trouble shooting easy.
|