Masteryota, thank you so much for the information and diagram. I'm sorta committed to the type of lights, as I've already purchased them, and the buggy is a fix-up and sell kind of deal....which I've already sold. That said, I'll use your diagram to see if I can incorporate most, if not all of it. The two headlights only have one wire so the ground must be to the frame. I'll make sure where they attach is clean so I have a good ground. The switch in the diagram is exactly the one I have so should be easy to follow. Finally, would it be OK to run the supply (white) wire to the switch back to where the yellow wire from the battery ties into the Relay. I don't don't trust myself enough to mess around with the ignition switch/wiring. I will if you say that's the way to go, but if the other way is a good & easy work around I'd prefer to go that route. Again thanks for your input, I'll keep you posted as to how all this goes.
|