ok spent a lot of time on modding little things heres some pics
1.
cleaned and lube chained and fixed adjustment on it.
2.
I used 2 washers instead of one on the rear hubs because the castle nut was to loose for my liking and would cause the rear tires to be wobbly with these 2 washers it made it a perfect fit
pic of it on the hub and yes I was able to get the cotter pin in there
3.Gas tank installed
cut the one bar out and used it to make brackets and welded them in
4. just did a little extra welding on that front brace
5. New rear shocks are in and we cut the mounts off and welded them further up the frame to accommodate for the longer travel and man I love these new shocks! much better ride
