CDI wiring help!
Hello, I have a Helix 150cc buggy made by Fox I believe. The previous person to work on this tore out the wires from the actual connector instead of disconnecting it... Now I have a mess of 6 wires that come out of 2 different harnesses that obviously go into the CDI but I have no clue which wires go to which Pin-out. I have the Pin out diagram which is labelled 1 through 6. and the wires I have go as follows:
On the group of wires that plug into the 4 probe connector there is
Black
Black/Yellow
Green
Blue/White
And on the one with the 2 probe connector I have
Blue/White
Green
and a kill switch that comes off the cover with no possibility of knowing what wire mates with that..
So far I have it turning over but its obviously not getting spark.
Any of you wiring experts on these little devils care to give me a hand? (:
|