Okay, So I'm 90% sure I have a DC system. and I'm sure I have the wiring correct.
1 - Blue/White Ignition Trigger..... 2 - Black/Yellow Ignition Coil /// 5 - Nothing
3 - Green Ground 4 - Nothing Ground /// 6 - Black/White 12v
But I am still not getting spark or power to the Ignition Cables. My Black/White has 12volt constant power feed. and when it is cranking over my stator puts out about .5 volt at the blue/white trigger and I'm pretty sure 9 volts to the voltage regulator (when turning over. Does this sound right? I cannot find anywhere that says what kind of voltage I should be getting at crank.
|