View Single Post
  #7  
Old 12-22-2009, 07:18 PM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

Quote:
Originally Posted by joshstep1 View Post
I'm a little confused about no rev CDIs. Now I believe that the CDI that comes with these buggies limits the engine to 5500 RPMs. I think Mike (from ****) told me that my engine with a no rev CDI would top out at something like 9500 RPMs. If I'm pushing almost twice the RPMs out of the engine, then shouldn't I go twice as fast? Buggymaster told me that I would only gain about 2 MPH on the top end. I'm confused.
i did not get any rpm gains from my cdi4650@36mph,stock was the same.it did make more power but not rpms.rpms come from moving more air the more air you move from one end to the other the more rpms you will get.if you got a bigger header and mufler you will get more rpms.then you will need to rejet again and even more rpms and on and on.air=rpms
blow through a small straw and blow through a big straw and you can see how much more air will go through.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK