Don't waste your money on the BMI belts. I would not trust anything that relies on plastic latches to hold you in. The cam lock is more suited for cars where mud won't be a factor. The latch lock work great. I will WD-40 the small spring loaded catch after every ride. I use the 3" only because I did not realize the Jr. dragster 2" would be large enough for an adult. The 3" will chafe the skin if wearing a tank top shirt bur a set of pads remedy that. The 2" are all that's needed and will be more comfortable over the 3" especially if wearing a tank top. I attach the sub belt using the cross brace under the seat. You will want to drill a hole through the tubing which will weaken the tubing so you will also need to insert a metal bushing through the drilled hole and weld top and bottom. I use a 7/16" grade 8 shouldered bolt to fasten.
|