Sorry for the noob question. While I've change the oil on this machine (TAO TARGA 150cc) twice since Christmas, I've not seen where or how to change the CVT oil. The manual makes no reference. It is an automatic. Any suggestions?
Also, when I got it from the dealer (1-month service) the oil was all the way up to the thread on the screw cap...a good 1.5'' above has marks this was with a hot engine. I drained it the hash marks and I plan to check it again cold. Unfortunately, we ran it a couple of times before realizing this. Not sure if anything was adversely effected.
Quote:
Originally Posted by OLDKID
Ain't Nothin Like That " NEW BUGGY SMELL "
Remember the engine and CVT oil will need to be changed real soon , after break-in . I haven't had your particular machine , but had many others , and I've never seen a good factory airbox or filter yet . All were useless junk . UNIFILTER or K&N is a must . You'll be re-tightening bolts for a little bit , KEEP AN EYE ON YOUR REAR HUBS!
|