Ingntion Switch question
I have a Yerf Dog and the starter solenoid went out. I picked up a universal solenoid and when I check the voltage out of the switch, I do not have 12v to activate it when I turn the key.
I have 2 green wires leaving the switch - when I measure across them I get +12 volts. When I flip the leads I get -12 volts. I am perplexed.
There is a brown wire that has a constant 12V when the switch is on.
I can hook up an external push button to start but I wanted to use the original key to start. Any advice?
Thanks Bigg-o
|