Thread
:
Spiderbox Project Thread
View Single Post
#
89
11-14-2017, 08:32 AM
tkeagle
Heavy Contributor
Join Date: Mar 2015
Location: Central Kansas
Posts: 556
I took 1/4 inch angle iron. Placed it so was over the top. And the other side slid down back. Think angle iron was 1.5x1.5 width. Then welded all on brace and tubing. Was long enough so went past the engine brace by 2 inches.
tkeagle
View Public Profile
Send a private message to tkeagle
Find all posts by tkeagle