View Single Post
  #1  
Old 01-04-2011, 07:20 PM
uthe54's Avatar
uthe54 uthe54 is offline
Lite Contributor
 

Join Date: Aug 2010
Location: Gardner, KS
Posts: 68
Default Razor Vision Reverse Box (w/ Pictures!)

Hey guys!

Picked up another kart last weekend. Razor Vision 150cc.

The kart needs work. Burning oil bad. The guy told me it had sat for 3 years, so probably needs a top end rebuild - but it ran and I was able to test drive it around a little.

I've started tearing it down and have found that the cables that go to the reverse box were taken off. after further investigation, I see that when it moves, the entire reverse box rotates with the output shaft. I don't think thats how it's supposed to work. The problem, was the guy handed me a box of nuts, bolts, cables, levers, etc... so I really have no idea how this thing is supposed to work. I'm considering getting an entire new reverse assembly, but before I do that, I'd like to spend at least a little time researching how this is supposed to work and see if it is recoverable.

If anyone has some suggestions, I'd appriciate it. Attached are pictures of what I've got. It would also be EXTREMELY helpful if any of you have the same or similar reverse assemblies, to post pictures of your assemblies so that I can compare them.

PS. the way it is presented in the pictures is how I guessed it was supposed to go in, it could be completely wrong...







__________________
SunL SLGK-250 (CFMOTO)
*SOLD* SunL SLGK-160A (1P57QMJ)
*SOLD* Razor Vision Z-2150R (157FM)
Reply With Quote