I never had the problem of blowing the fuse until I installed the 11 pole stator. It always seemed to blow after winding out engine then letting off the gas. As the engine spooled down the fuse would blow. I come across a thread on one of the scooter forums which said the problem was due to the large stator causing an unstable current which will spike causing fuse to blow. At the time I just kept fuses on hand since it did not always do it. Eventually I had to rewire my buggy due to corrosion of the wires which had run through the tube frame. I had rewired using 14 ga. wire and have not had this problem since. At one time MRP sold a current stabilizer for the GY6 scooter but have never known anyone who used one.
|