I doubt that you will hurt anything (from my understanding they are all supposed to touch for the buggy to start anywho)... Have you tried finding the manual or a wiring diagram for the buggy online?
To start you turn the key one click and that engages/disengages the kill, then you turn it all the way and the starter kicks on, once the buggy is running you let off the key and it stays in the first position until you turn it off.
That's the way my old crossfire 150 worked... it also had the black and green wires on the toggle for the kill, but the switch broke and I just disconnected them and wrapped them (not connected).
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
|