VM26 questions
Got a VM26 on the way, got a couple questions:
here's the carb's jetting as delivered..
Round Slide VM Series Carburetor by Mikuni
Bore Size : 26
Main Jet : 190
Pilot Jet : 22.5
Needle Jet : O-0(332
Throttle Valve : 1.5
Jet Needle : 5E75
Air Jet : 0.5
Needle Valve : 2.5 (VM26/26)
I'm at sea level, will i need to adjust this for my 4V 155cc GY6?
Will i still need the riser or will this fit under the bar without it?
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit
2014 Kandi 90B
|