Okay, I have the angled steel tacked on, but realizing I can really only get 4 solid welds on the angle and frame. I guess as long as I have good solid welds at the tops and sides of the angled steel where it meets the frame that should be plenty huh?
If you look at the 3rd picture you can see where I thought I was going to be able to weld the undersides of the angled to the frame, but.....Crappy be be's.
I guess just keep doing short bursts to fill in the large gaps.
Now I am just realizing that I should have drilled some holes in the angled steel and use those holes to tack it to the frame. Maybe I will see if I can drill through the angled without hitting the frame and do those welds too.
Last edited by 2SlickNick; 03-28-2014 at 11:05 PM.
|