Quote:
Originally Posted by DistilledMetal
I am not positive if the cable is broken. I am a bit nervous to try to switch into reverse because it still goes forward fine. Is there a test i can do to see if it is broken or if it just needs to be adjusted?
|
If the cable is broken or not tight enough the buggy will not go into reverse. Basically it will break in forward.
to know if your reverse cable is broken all you have to do is just pull the metal wire out if it's broken it will slip right out.
Just shift into reverse, if the buggy jumps, are seems as though it is in neutral , then the cable is fine and it needs to be adjusted.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
|