You will need to get your test light or voltohm meter out. First let me say you will want a waterproof switch, stay away from the cheap autozone switches. I got mine through summit racing not cheap but going on 6 years now. I perfer the momentary toggle for the start side.
Easiest way to check is using the existing switch. Find your hotwire and acessory wire. The hot will go to one side of the start switch, your accy. wire will go to the other side this gives 12V to the cdi, run a jumper wire off the accy. side of on off switch to momentary switch then start wire to other side. Not sure what color wires you have but I'll give you the Kinroad/Blade colors. Red = power, Black = Start, Blk./Wht. = accy.(pwr to cdi ect.) Green = ground.
|