Make sure you have the sliders in correctly. With the buggy up on jack stands and cvt cover off run the engine in drive and make sure the belt rises to top on variator and belt on clutch drops all the way down on pulley, than let off gas and make sure belt drops fully down on variator and is riding fully up on clutch. If you installed the sliders on a stock variator which is designed foe rollers your 10 gm. sliders are going to act like 8 gm. rollers. If your filter on cvt is not plunged the cvt should run around 180-190 degrees. Those numbers are for the stock variator and clutch.
Last edited by SYCARMS; 05-26-2016 at 10:53 AM.
|