You have to get the good bearings and put a spacer in between them. Mine have lasted me for a while now since I have done this. These are the bearings I use... http://www.*************/item/High-Sp...38-600641-6980
If you don't do the spacer, all of the pressure from tightening the bolt rest on the bearings flange, and also the inner race has a load pushing on it at all times with no support.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
Last edited by T3beatz; 06-30-2012 at 09:43 PM.
|