View Single Post
  #6  
Old 03-11-2019, 03:04 PM
TBS99's Avatar
TBS99 TBS99 is offline
Lurker
 

Join Date: Jan 2019
Location: Eatonville WA
Posts: 19
Default

I have finished painting the kart with satin Black. It came out really nice. The front end parts are installed. I had to buy new front tires due to being old and cracked. Also put new wheel bearings in the front wheels. I pressure bled all the old brake fluid out of the system with new fluid and inspected everything to make sure they work good and they do. Hopefully it will be completed today so I can drive it and determine if there is anything else that needs to be repaired. I noticed the original lights did not work so after taking them apart I found the bulbs were burned out. I will be heading down to 4Wheel Parts here since they have the bulbs made by Hella that are 35w for only $1.99. Well after driving it today I noticed that I need to do some tuning to the new carb and adjust the steering because it seems to wander at full speed.
Attached Images
File Type: jpg Yerf1.jpg (69.6 KB, 9 views)
File Type: jpg Yerf2.jpg (69.9 KB, 10 views)
File Type: jpg Yerf3 front.jpg (71.6 KB, 10 views)
__________________
Tom

SunL 250cc
Carter 150cc
Yerf Dog 150cc
Reply With Quote