Quote:
Originally Posted by metalstudman1
Does your hubs have a round back plate?108mm is just barely different than 110mm- rotate the bolt pattern 180 degrees & re-drill the plate for the other bolt pattern - or oval out the bolt holes in the wheel
|
The hubs I plan on getting or these...
http://www.**********.com/store/inde...roducts_id=586 with these hubs the Wheels I have should bolt right up... but they are not in stock.
I was gonna get the surplus center 18" from the link I posted for $25 each and find some hubs that will fit, for temporary riding, then move them over to my Manco Intruder once the BD hubs show up.
My problem is, I can't find any 4x110mm hubs for the yerf with 5/8" bearings... other than the BD ones.