I finally got the buggy running again. I ended up having the cam in 180 out. I used this document to correct the issue.
http://www.**********.com/tech-cente...ad-center-tdc/ I also set the valves with feeler gauges from another how to doc.I used a how to for the vacuum lines to get those redone properly. I hooked up my charger/starter and it fired right up. I spent the rest of the night putting the covers on seats in etc. I have to stop after work and pick up a new battery for it. I so all that is left to do is the oil change set the carb so it idles nicely and reinstall the rear fender covers. My kids were very excited to see the buggy alive again. Thank you all for your help.