[hhgtsplatinum]

Hey everyone was wondering if anybody could share some advice please, I have a 1P57 motor on my buggy, I ported the head and added a A12 cam, I also did the spark plug, wire, cdi, exhaust and UNI intake, upgraded the cvt as well. The 24mm cvk carb would not work with it anymore until I upped the slow jet from a 35 to a 38, It now idles great and runs like a bat out of hell... I needed more! (don't we all) so I recently purchased a 26mm D slide oko carb to mach the port and intake valve, I was puzzled as the jets that came in that carb installed and extra ones are not labeled at all, no numbers anywhere. It said on the description that it worked with motors up to 200cc... I want to order some pilot and main jets but have no idea where to start. with the jets that came in the oko it will not idle, it will stay alive (barely) if I cover the intake a bit...(I believe too lean) It is exactly as when my 24mm cvk had the 35 slow pilot jet... has anybody ever had a similar set up or know where I should start with the jets? thanks for any help.

Btw my altitude is 400 feet above sea... thanks again