hello this is my first time on this forum,looks like you guys and guys have got a good forum going on here.
wow i never seen a slider do that before but i have rollers.
i'm still running a set of 10 gram sliders after a couple years.
i did have a problem once wearing one side of them down some and nicking them up.straightened them up with light sand paper.
my problem was i used the guides that came with the sliders and they were to wide for the stock variator ramp plate.it pushed them in some and caused the ramp plate to drag on the guides on the variator.
got the sliders running off, hanging up on down shifts.doing that was not letting the belt come back down to the lower gearing,caused belt to slip and putting more strain on the clutch and was heating things up pretty fast.
i see your running a performance variator so that might not have been your problem just some thoughts though.
i'm running the sliders now in a performance variator also.
pud
|