as far as the symptoms go it will start up and the shifter works in N,F,&R but no response when it throttle applied. I even reved it up probably to 3000 rpm with no response in any gear. The shift cable is connected to the shifter and the trans.
Yesterday I opened the belt housing and everything there looks fine the belt looks new and when the you gas it the cvt works, it also is engaging the clutch but with no response to gear shifting.
next thing is to remove the cover on the other side where the F & R gears are at, and see what is going on there. the PO had removed the motor and the shift cable was disconnected from the trans.
What should I be looking for in that housing?
|