if you have a reverse gearbox installed with the 16T sprocket you will have to change the chain or add links to it (easier just to get a new chain with the breaker tool and cut it to the correct size). If you just have the stock sprocket and the 39T one you should be fine with the stock chain.
I got my chain from highrpmracer.com but they have very bad service, but good prices.
I would try and contact Tom from the banner up top.
Just a tip, don't go with the 39T sprocket unless you want to top out at around 30mph!
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
|