The idea is to Split an atv in 4 parts to graft into a go kart.
I"m taking a murray explorer cart
and a 1987 suzuki lt 230s quad
split the front from the rear at the steering
split the front from the steering
split the front in half
graft the front halfs on either side of the cart for the front suspension, steering and disc brakes
extended the tierods to the center of the cart and weld the steering pivot sections in the front of the cart right where the steering stuff is already but making it much much thicker.
use all the controls for the quad. put a proportioning valve and use the front master for all the brakes.
weld the whole rear of the quad steering back into the rear motor and axle area of the cart to get the engine cradle, swing arm, shock mount and brakes.