2300 Sea Level Jetting, White Plug
Hi,
I just did the first stage of mods to my buggy and now jetting. I added following:
Uni Filter with 6" Tube
12G Sliders in a 118 variator
NCY Clutch with Ban Jing Bell
Performance exhaust, similar to supertrap with disk
Iridium plug
Cdi Adjustable Performance Box
Performance Coil
Kevlar drive belt
I have what I believe is a 24mm carb that looks like keihin with 'Mikuni' On side.
I have put in a 135 main jet and my plug is still almost white with barely any tan at all. I am at 2300 above sea level so I am shocked I am at 135 with a white plug still. I checked for air leaks and nothing. Any thoughts on it? Seems also like the 135 does not run as well as the 130 I had in it. However, that 130 was real white.
Charles
__________________
Buggy 1
150cc Buggy
A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust.
Guang Max 150
All stock but to be like Buggy 1 with all koso cvt.
Roketa 150
Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats.
|