Post a pic of your carb-Most carbs are the same. Looking at the carb from the rear (throttle on the right, FEV on the left) Main fuel inlet is just in front & below of the FEV-usually a brass nipple. Just behind the FEV up high is a vent/overflow nipple- goes to air. Just in front of throttle is the vacuum inlet- goes to intake, either directly or into a "T" that would go to a petcock valve at the tank. The idle screw is on the throttle apparatus. The fuel/air mix screw is behind a (usually brass colored) cap behind and below the FEV,pop/pry the cap to expose the screw. The bowl will have a fuel drain screw with a nipple- vent to air.
|