yep, the one that is on the Jack-shaft. I don't know how thick your jack-shaft is but most or 5/8" like these... http://www.*************/item/41-Sprocket-400901--1507
The one other thing I could suggest is getting a slightly bigger engine. One of the predators from Harbor Freight might work, they are like 6.5hp and they run pretty good.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
Last edited by T3beatz; 06-05-2012 at 09:42 PM.
|