Quote:
Originally Posted by liduno
You would be best to look it up because my memory is terrible, but I ''think'' it's 18mm from the bottom of the float to the base of the carb. That might be the setting for a different carb though, I work on a lot of different things.
This is measured just as the float closes the needle. You may not even have an adjustable float.
|
=================================
Got it going with the electric choke hooked up it ran fine...It did not before i cleaned the jets, I am happy with that... Now here I go again...I am used to regular go-karts this is my first buggy, the 6.5 hp motor geared with a 72 t sprocket and 12 t clutch are pretty snappy (and less weight)... I can only get this thing to go 26 MPH and it takes a while to get there... Is that Normal? Other then opening up the engine (can u imagine the questions i'd ask on that 1)...
is there anything i can do to get it to go faster? And liduno thank you very much for hanging with me ... Bob